References
Agliardi F, Zanchetta S, Crosta GB (2014) Fabric controls on the brittle failure of folded gneiss and schists. Tectonophysics 637:150–162. https://doi.org/10.1016/j.tecto.2014.10.006
Basu A, Mishra DA, Roychowdhury K (2013) Rock failure modes under uniaxial compression, Brazilian and point load tests. Bull Eng Geol Environ 72:457–475. https://doi.org/10.1007/s10064-013-0505-4
Berčáková A, Melichar R, Obara Y, Ptáček J, Souček K (2017) Evaluation of anisotropy of fracture toughness in brittle rock, migmatized gneiss. Procedia Eng 91:900–907. https://doi.org/10.1016/j.proeng.2017.05.260
Blès JL, Fuega B (1986) The fracture of rocks. North Oxford Academic, London, pp 50–56
Esamaldeen A, Wu G, Zhao Z, Jiang W (2014) Assessments of strength anisotropy and deformation behaviour of banded amphibolite rocks. Geotech Geol Eng 32:429–438. https://doi.org/10.1007/s10706-013-9724-5
Ghazvinian A, Geranmayeh Vaneghi R, Hadei MR (2012) Behavior and failure mechanism of angoran schists under uniaxial compression loading. In: Rock Engineering and technology for sustainable underground construction. EUROCK 2012—ISRM International Symposium
Goodman RE (1989) Introduction to rock mechanics, 2nd edn. Wiley, Hoboken, pp 179–220
ISRM (2007) The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the commission on testing methods. International society for rock mechanics, compilation arranged by the ISRM Turkish national group, Ankara, Turkey, pp 153–156
Kříbek B, Hrazdíra P, Sixta V, Šikl J, Mikšovský M, Vernera Z, Sobotka M (1997) Structural, hydrological and geomechanical evaluation of the rock mass of the Rožná Deposit with respect to waste pond storage. Czech Geological Survey, Prague ((Unpublished report))
Nasseri MHB, Rao KS, Ramamurthy T (2003) Anisotropic strength and deformational behaviour of Himalayan schists. Int J Rock Mech Min Sci 40:3–23. https://doi.org/10.1016/S1365-1609(02)00103-X
Plinninger RJ, Alber M (2015) Assessment of intact rock strength in anisotropic rock—Theory, experiences and implications on site investigations. In: Schubert W (ed) Proceedings of the ISRM Regional Symposium, EUROCK 2015 and 64th Geomechanics Colloquium, pp 297–302
Ptáček J, Melichar R, Hájek A, Koníček P, Souček K, Staš L, Kříž P, Lazárek J (2013) Structural analysis within the Rožná and Olší uranium deposits (Strážek Moldanubicum) for the estimation of deformation and stress conditions of underground gas storage. Acta Geodynam Geomater 10:237–246. https://doi.org/10.13168/agg.2013.0024
Ramamurthy T (1993) Strength modulus response of anisotropic rocks. In: Hudson JA (ed) Compressive rock engineering 1. Pergamon, Oxford, pp 313–329
Singh J, Ramamurthy T, Venkatappa RG (1989) Strength anisotropies in rocks. Ind Geotech J 19:147–166
Singh M, Samadhiya NK, Kumar A, Kumar V, Singh B (2015) A nonlinear criterion for triaxial strength of inherently anisotropic rocks. Rock Mech Rock Eng 48:1387–1405. https://doi.org/10.1007/s00603-015-0708-z
Usol’tseva O, Tsoi P, Semenov V (2017) The influence of anisotropy angle on the strength and deformation properties of artificial geomaterials and rocks. Procedia Eng 191:512–519. https://doi.org/10.1016/j.proeng.2017.05.211
Yin P-F, Yang S-Q (2018) Experimental investigation of the strength and failure behaviour of layered sandstone under uniaxial compression and Brazilian testing. Acta Geophys 66:585–605. https://doi.org/10.1007/s11600-018-0152-z
Acknowledgements
The research was funded by Project of the Institute of Clean Technologies for Mining and Utilization of Raw Materials for Energy Use under National Sustainability Program I (identification code: LO1406). The article was also supported by a project for the long-term conceptual development of research organisations (RVO: 68145535). The work was also written in connection with a project r/o no. CZ.02.1.01/0.0/0.0/16_013/0001792; RINGEN—research infrastructure upgrade, supported by the Research, Development and Education Operational Programme.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Berčáková, A., Melichar, R. & Souček, K. Mechanical Properties and Failure Patterns of Migmatized Gneiss with Metamorphic Foliation Under UCS Test. Rock Mech Rock Eng 53, 2007–2013 (2020). https://doi.org/10.1007/s00603-019-02012-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-019-02012-2