Abstract
Ferritic-martensitic steels of 9Cr–1W type strengthened by oxide dispersion (ODS) are candidate structural materials of in-vessel components of proposed sodium-cooled fast reactors and fusion reactors. As a promising alternative, this work aimed to design ferritic-martensitic 9Cr–1W steels of Eurofer type strengthened by a homogeneous dispersion of nitrides. AlN and BN were selected for this pioneering study, and the two nitride dispersion strengthened (NDS) steels were prepared by mechanical alloying and compacting using spark plasma sintering (SPS). Their mechanical properties were assessed by tensile tests ranging from room temperature to 800 °C and compared to the tensile characteristics of conventional as well as oxide dispersion strengthened (ODS) 9Cr–1W steels. The strength of the two NDS steels presented here was comparable or even higher than that of the conventional and the ODS variants. Furthermore, the uniform plastic strain behaviour of the NDS steels was similar to the ODS counterparts prepared by HIP or SPS from mechanically alloyed powders. In addition, the BN reinforcement effectively prevented large plastic deformation at temperatures above 600 °C that would typically result in a significant increase in total elongation, a phenomenon encountered in 9Cr–1W steels. This quality could open a new application window and potentially lead to the development of heat-resistant low-chromium 9Cr–1W type steels.
Similar content being viewed by others
References
Benjamin JS (1970) Dispersion strengthened superalloys by mechanical alloying. Metall Mater Trans B 1:2943–2951. https://doi.org/10.1007/BF03037835
Fischer JJ (1978) Dispersion strengthened ferritic alloy for use in liquid-metal fast breeder reactors (LMFBRS). US Patent 4075010
Schneibel JH, Heilmaier M, Blum W, Hasemann G, Shanmugasundaram T (2011) Temperature dependence of the strength of fine- and ultrafine-grained materials. Acta Mater 59:1300–1308. https://doi.org/10.1016/j.actamat.2010.10.062
Lindau R, Möslang A, Schirra M, Schlossmacher P, Klimenkov M (2002) Mechanical and microstructural properties of a hipped RAFM ODS-Steel. J Nucl Mater 307–311:769–772. https://doi.org/10.1016/S0022-3115(02)01045-0
Schaeublin R, Leguey T, Spatig P, Baluc N, Victoria M (2002) Microstructure and mechanical properties of two ODS ferritic/martensitic steels. J Nucl Mater 307–311:778–782. https://doi.org/10.1016/S0022-3115(02)01193-5
Li Z, Lu Z, Xie R, Lu C, Shi Y, Liu C (2017) Effects of Y2O3, La2O3 and CeO2 additions on microstructure and mechanical properties of 14Cr-ODS ferrite alloys produced by spark plasma sintering. Fusion Eng Des 121:159–166. https://doi.org/10.1016/j.fusengdes.2017.06.039
Yan P, Yu L, Liu Y, Liu C, Li H, Wu J (2018) Effects of Hf addition on the thermal stability of 16Cr-ODS steels at elevated aging temperatures. J Alloys Compd 739:368–379. https://doi.org/10.1016/j.jallcom.2017.12.245
Husak R, Hadraba H, Chlup Z, Heczko M, Kruml T, Puchy V (2019) ODS Eurofer steel strengthened by Y-(Ce, Hf, La, Sc, and Zr) complex oxides. Metals 9:1148. https://doi.org/10.3390/met9111148
Hadraba H, Husak R, Stratil L, Siska F, Chlup Z, Puchy V, Michalicka J (2017) Survey of oxide candidate for advanced 9%, 14% and 17%Cr ODS steels for fusion applications. Fusion Eng Des 124:1028–1032. https://doi.org/10.1016/j.fusengdes.2017.04.048
Kindlimann LE, Ansell GS (1970) Dispersion strengthening austenitic stainless steels by nitriding. Metall Mater Trans B 1:507–515. https://doi.org/10.1007/BF02811562
Wilson EG (1987) Production of nitride dispersion strengthened alloys. US Patent 4708742
Wilson EG (1989) Nitride dispersion-strengthened steels and method of making. US Patent 4846899
Hu P, Yan W, Deng L, Sha W, Shan Y, Yang K (2010) Nitride-strengthened reduced activation ferritic/martensitic steels. Fusion Eng Des 7–9:1632–1637. https://doi.org/10.1016/j.fusengdes.2010.04.066
Huang L, Liu Z, Chen S, Guo Y (2015) Microstructure and tensile properties of yttrium nitride dispersion-strengthened 14Cr–3W ferritic steels. Fusion Eng Des 101:17–21. https://doi.org/10.1016/j.fusengdes.2015.09.004
Sandim HRZ, Renzetti RA, Padilha AF, Raabe D, Klimenkov M, Lindau R, Möslang A (2010) Annealing behavior of ferritic–martensitic 9%Cr–ODS–Eurofer steel. Mater Sci Eng A 527:3602–3608. https://doi.org/10.1016/j.msea.2010.02.051
Rieth M, Schirra M, Falkenstein A, Graf P, Heger S, Kempe H, Lindau R, Zimmermann H (2003) EUROFER 97: tensile, charpy, creep and structural tests. FZKA 6911 Scientific report, Forschungszentrum Karlsruhe, Germany
Lucon E (2003) Characterisation of the mechanical properties of EUROFER in the unirradiated and Irradiated condition. SCK·CEN Reports no. BLG-945, Studiecentrum voor Kernenergie, Mol, Belgium
Cayron C, Rath E, Chu I, Launois S (2004) Microstructural evolution of Y2O3 and MgAl2O4 ODS Eurofer steels during their elaboration by mechanical milling and hot isostatic pressing. J Nucl Mater 335:83–102. https://doi.org/10.1016/j.jnucmat.2004.06.010
McClintock DA, Sokolov MA, Hoelzer DT, Nanstad RK (2009) Mechanical properties of irradiated ODS-Eurofer and nanocluster strengthened 14YWT. J Nucl Mater 392:353–359. https://doi.org/10.1016/j.jnucmat.2009.03.024
Olier P, Bougault A, Alamo A, De Carlan Y (2009) Effects of the forming processes and Y2O3 content on ODS-Eurofer mechanical properties. J Nucl Mater 386–388:561–563. https://doi.org/10.1016/j.jnucmat.2008.12.177
Klimiankou M, Lindau R, Möslang A (2007) Direct correlation between morphology of (Fe, Cr)23C6 precipitates and impact behavior of ODS steels. J Nucl Mater 367–370:173–178. https://doi.org/10.1016/j.jnucmat.2007.03.150
Lindau R, Möslang A, Rieth M, Klimiankou M, Materna-Morris E, Alamo A, Tavassoli A-AF, Cayron C, Lancha A-M, Fernandez P, Baluc N, Schäublin R, Diegele E, Filacchioni G, Rensman JW, Bvd S, Lucon E, Dietz W (2005) Present development status of Eurofer and ODS-Eurofer for application in blanket concepts. Fusion Eng Des 75–79:989–996. https://doi.org/10.1016/j.fusengdes.2005.06.186
Lucon E (2007) Tensile and fracture toughness properties of EUROFER ODS (''EU Batch'' - 6 mm plate) in the unirradiated condition. SCK-CEN technical report BLG-1024, Studiecentrum voor Kernenergie, Mol, Belgium
Zhou X, Liu Y, Yu L, Ma Z, Guo Q, Huang Y, Li H (2017) Microstructure characteristic and mechanical property of transformable 9Cr-ODS steel fabricated by spark plasma sintering. Mater Des 132:158–169. https://doi.org/10.1016/j.matdes.2017.06.063
Fu J, Brouwer JC, Richardson IM, Hermans MJM (2019) Effect of mechanical alloying and spark plasma sintering on the microstructure and mechanical properties of ODS Eurofer. Mater Des 177:107849. https://doi.org/10.1016/j.matdes.2019.107849
Acknowledgements
The Czech Science Foundation project 20-20873S financially supported this work. In addition, CzechNanoLab project LM2018110 funded by MEYS CR is gratefully acknowledged for the financial support of the measurements/sample fabrication at CEITEC Nano Research Infrastructure.
Author information
Authors and Affiliations
Contributions
HH Conceptualisation, Methodology, Investigation, Writing- Original draft preparation, Writing- Reviewing and Editing; ZC Investigation, Writing- Reviewing and Editing; JC Investigation, Writing- Reviewing and Editing; IK Investigation, Writing- Reviewing and Editing.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Handling Editor: Megumi Kawasaki.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Hadraba, H., Chlup, Z., Cizek, J. et al. 9Cr–1W steel strengthened by AlN and BN dispersion. J Mater Sci 57, 12572–12584 (2022). https://doi.org/10.1007/s10853-022-07395-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-022-07395-2