Počet záznamů: 1
Rheological behaviour and thermal dilation effects of alumino-silicate adhesives intended for joining of high-temperature resistant sandwich structures
- 1.
SYSNO ASEP 0478515 Druh ASEP J - Článek v odborném periodiku Zařazení RIV J - Článek v odborném periodiku Poddruh J Článek ve WOS Název Rheological behaviour and thermal dilation effects of alumino-silicate adhesives intended for joining of high-temperature resistant sandwich structures Tvůrce(i) Černý, Martin (USMH-B) RID, ORCID, SAI
Chlup, Zdeněk (UFM-A) RID, ORCID
Strachota, Adam (UMCH-V) RID, ORCID
Schweigstillová, Jana (USMH-B) RID, ORCID, SAI
Svítilová, Jaroslava (USMH-B)
Halasová, Martina (UFM-A)Zdroj.dok. Journal of the European Ceramic Society. - : Elsevier - ISSN 0955-2219
Roč. 37, č. 5 (2017), s. 2209-2218Poč.str. 10 s. Forma vydání Tištěná - P Jazyk dok. eng - angličtina Země vyd. GB - Velká Británie Klíč. slova Sandwich ; Inorganic adhesive ; Si-O-C ceramics ; Ceramic foam ; Ceramic fibre Vědní obor RIV JH - Keramika, žáruvzdorné materiály a skla Obor OECD Ceramics Vědní obor RIV – spolupráce Ústav makromolekulární chemie - Makromolekulární chemie
Ústav fyziky materiálu - Keramika, žáruvzdorné materiály a sklaCEP GAP107/12/2445 GA ČR - Grantová agentura ČR Institucionální podpora USMH-B - RVO:67985891 ; UFM-A - RVO:68081723 ; UMCH-V - RVO:61389013 UT WOS 000395953600038 EID SCOPUS 85008708388 DOI 10.1016/j.jeurceramsoc.2016.12.046 Anotace The study is concerned with inorganic adhesive layers located between the CMC composite skin and the Si-O-C ceramic foam core of sandwiches intended for high-temperature use. Two types of aluminosilicate adhesives (mastics) were tested for use as the bonding layer. The rheological properties of adhesive and its dimensional changes during high-temperature curing play a key role in terms of successful manufacture and subsequent use at high temperatures. In order to characterise these properties, specimens consisting only of the dried adhesive were subjected to compression tests conducted at increasing temperature from 300 to 1000 degrees C. These experiments were carried out via the application of two loading modes using both the static pre-load and cyclic loading methods. The above results were compared with thermal expansion records determined from fully-cured adhesives. In addition to the above investigation, the mechanical properties of the adhesive joint were measured employing both the DCB and shear tests. Pracoviště Ústav struktury a mechaniky hornin Kontakt Iva Švihálková, svihalkova@irsm.cas.cz, Tel.: 266 009 216 Rok sběru 2018
Počet záznamů: 1