Počet záznamů: 1
The influence of processing temperature and the starch content on the microstructure and mechanical properties of SiOC foams
- 1.
SYSNO ASEP 0450445 Druh ASEP A - Abstrakt Zařazení RIV Není vybrán druh dokumentu Název The influence of processing temperature and the starch content on the microstructure and mechanical properties of SiOC foams Tvůrce(i) Halasová, Martina (UFM-A)
Černý, Martin (USMH-B) RID, ORCID, SAI
Chlup, Zdeněk (UFM-A) RID, ORCID
Strachota, Adam (UMCH-V) RID, ORCID
Dlouhý, Ivo (UFM-A) RID, ORCIDCelkový počet autorů 5 Zdroj.dok. Book of Abstracts. 17th International Conference on the Strength of Materials (ICSMA-17). - Brno : Ústav fyziky materiálů AV ČR, v. v. i., 2015 / Dlouhý A. ; Kunz L. - ISBN 978-80-87434-07-9
S. 301Poč.str. 1 s. Akce ICSMA-17 International Conference on the Strength of Materials /17./ Datum konání 09.08.2015-14.08.2015 Místo konání Brno Země CZ - Česká republika Typ akce WRD Jazyk dok. eng - angličtina Země vyd. CZ - Česká republika Klíč. slova SiOC glass ; Foams ; mechanical properties Vědní obor RIV JL - Únava materiálu a lomová mechanika Vědní obor RIV – spolupráce Ústav makromolekulární chemie - Makromolekulární chemie
Ústav struktury a mechaniky hornin - Únava materiálu a lomová mechanikaInstitucionální podpora UFM-A - RVO:68081723 ; USMH-B - RVO:67985891 ; UMCH-V - RVO:61389013 Anotace The SiOC foams were prepared from polymethylphenylsiloxane resin (commercially known as L901 resin) and a commonly available starch as a foaming agent. A set of specimens of various starch content and the processing temperature to find the optimum combination and as well as the dependences allowing tailoring of materials were prepared. The optimum amount of starch was elaborated at the temperature of 230 °C and the amount of the starch varied from 0.7 up to 2.2 wt%. The specimens were processed at the temperature range from 220 to 250 °C with the step of 10 °C to observe the influence of temperature on the gas evolution and therefore the structure development of foam for constant amount of foaming agent at the level of 2 wt/%. Theoretical and relative foam densities were calculated based on the known bulk SiOC density after pyrolysis (1.8 g Pracoviště Ústav fyziky materiálu Kontakt Yvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485 Rok sběru 2016
Počet záznamů: 1