Počet záznamů: 1
Comparison of microstructural properties and Charpy impact behaviour between different plates of the Eurofer97 steel and effect of isothermal ageing
- 1.
SYSNO ASEP 0369890 Druh ASEP J - Článek v odborném periodiku Zařazení RIV J - Článek v odborném periodiku Poddruh J Článek ve WOS Název Comparison of microstructural properties and Charpy impact behaviour between different plates of the Eurofer97 steel and effect of isothermal ageing Tvůrce(i) Stratil, Luděk (UFM-A) ORCID
Hadraba, Hynek (UFM-A) RID, ORCID
Buršík, Jiří (UFM-A) RID, ORCID
Dlouhý, Ivo (UFM-A) RID, ORCIDCelkový počet autorů 4 Zdroj.dok. Journal of Nuclear Materials. - : Elsevier - ISSN 0022-3115
Roč. 416, č. 3 (2011), s. 311-317Poč.str. 7 s. Jazyk dok. eng - angličtina Země vyd. NL - Nizozemsko Klíč. slova Eurofer´97 ; DBTT ; impact behaviour ; fracture behaviour ; carbide coarsening ; hardness Vědní obor RIV JG - Hutnictví, kovové materiály CEP GAP108/10/0466 GA ČR - Grantová agentura ČR GA106/08/1397 GA ČR - Grantová agentura ČR CEZ AV0Z20410507 - UFM-A (2005-2011) UT WOS 000296115900010 DOI 10.1016/j.jnucmat.2011.06.018 Anotace The microstructure and fracture properties of the Eurofer97 steel plates of thickness 14 mm and 25 mm were investigated in as-received state and in state after long-term thermal ageing (550 °C/5000 h). Detailed microstructure studies were carried out by means of optical light, electron and quantitative electron microscopy. Mechanical properties were evaluated by means of Charpy impact testing and hardness testing and fracture surfaces were fractographically analysed in macro and microscales. The microstructure of the Eurofer97 consisted of tempered martensite with M23C6 and MX precipitates. Microstructure of 14 mm plate was more homogenous and fine grained than 25 mm plate. Due to different microstructure the tDBTT of thicker plate was on +10 °C higher than for 14 mm plate for which reached −60 °C. Slight microstructural changes on the level of subgrain consisting of their partial recrystallization and slight carbide coarsening were observed after applied ageing. The isothermal ageing caused evident shift in tDBTT about +5 °C, which was most likely caused by recrystallization of subgrains. Pracoviště Ústav fyziky materiálu Kontakt Yvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485 Rok sběru 2012
Počet záznamů: 1