Počet záznamů: 1  

Creep of Ex-service AISI-316H Steel at Very Low Strain Rates

  1. 1.
    SYSNO ASEP0362906
    Druh ASEPC - Konferenční příspěvek (mezinárodní konf.)
    Zařazení RIVD - Článek ve sborníku
    NázevCreep of Ex-service AISI-316H Steel at Very Low Strain Rates
    Tvůrce(i) Kloc, Luboš (UFM-A) RID, ORCID
    Spindler, M. (GB)
    Sklenička, Václav (UFM-A) RID, ORCID
    Celkový počet autorů3
    Zdroj.dok.Materials for Advanced Power Engineering 2010. - Liege : Forschungszentrum Jülich GmbH, 2010 / Lecomte-Beckers J. ; Contrepois Q. ; Beck T. ; Kuhn B. - ISSN 1866-1793 - ISBN 978-3-89336-685-9
    Rozsah strans. 142-149
    Poč.str.8 s.
    AkceMaterials for advanced power engineering 2010 /9./
    Datum konání27.09.2010-29.09.2010
    Místo konáníLiege
    ZeměBE - Belgie
    Typ akceEUR
    Jazyk dok.eng - angličtina
    Země vyd.DE - Německo
    Klíč. slovalow stress creep ; primary creep ; stress exponent ; creep resistant steel
    Vědní obor RIVJG - Hutnictví, kovové materiály
    CEPIAA200410701 GA AV ČR - Akademie věd
    CEZAV0Z20410507 - UFM-A (2005-2011)
    AnotaceCreep response of ex-service austenitic steel was investigated at temperatures from 470 to 550°C and stresses from 80 to 120 MPa. The conditions lead to very low strain rates. Helicoid spring specimen technique and improved conventional creep tests were used to record very low creep strains. Results were compared to creep curves obtained on the new steel of the same type under the same conditions. The creep behaviour of the ex-service steel was very similar to that of the new steels. No creep damage or considerable change of microstructure was detected during the service period of 65/,000/,hours. The helicoid spring specimen technique provides results compatible with that of conventional creep tests, but with superior accuracy with very low creep strains. The data can also be used in some special cases, where the creep strain itself is limiting the creep life of the part rather than creep failure.
    PracovištěÚstav fyziky materiálu
    KontaktYvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485
    Rok sběru2012
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.