Počet záznamů: 1  

Visualization of Flow Separation and Control by Vortex Generators on an Single Flap in Landing Configuration

  1. 1.
    SYSNO ASEP0351483
    Druh ASEPC - Konferenční příspěvek (mezinárodní konf.)
    Zařazení RIVD - Článek ve sborníku
    NázevVisualization of Flow Separation and Control by Vortex Generators on an Single Flap in Landing Configuration
    Tvůrce(i) Součková, Natálie (UT-L)
    Kuklová, J. (CZ)
    Popelka, Lukáš (UT-L)
    Matějka, Milan (UT-L)
    Celkový počet autorů4
    Zdroj.dok.Proceedings of the International Conference Experimental Fluid Mechanics 2010. - Liberec : Technical University of Liberec, 2010 / Vít T. ; Dančová P. - ISBN 978-80-7372-670-6
    Rozsah strans. 1-12
    Poč.str.12 s.
    Forma vydánícd-rom - cd-rom
    AkceExperimental Fluid Mechanics 2010
    Datum konání24.11.2010-26.11.2010
    Místo konáníLiberec
    ZeměCZ - Česká republika
    Typ akceWRD
    Jazyk dok.eng - angličtina
    Země vyd.CZ - Česká republika
    Klíč. slovaflow separation ; vortex generators ; visualization
    Vědní obor RIVJU - Aeronautika, aerodynamika, letadla
    CEP1M06031 GA MŠMT - Ministerstvo školství, mládeže a tělovýchovy
    GAP101/10/1230 GA ČR - Grantová agentura ČR
    GA101/08/1112 GA ČR - Grantová agentura ČR
    GA103/09/0977 GA ČR - Grantová agentura ČR
    CEZAV0Z20760514 - UT-L (2005-2011)
    AnotaceThis paper focuses on a suppression of the flow separation, which occurs on a deflected flap, by means of vortex generators (VG's). An airfoil NACA 63A421 with a simple flap and vane-type vortex generators were used. The investigation was carried out by using experimental and numerical methods. The data from the numerical simulation of the flapped airfoil without VG's control were used for the vortex generator design. Two sizes, two different shapes and various spacing of the vortex generators were tested. The flow past the airfoil was visualized through three methods, namely tuft filaments technique, oil and thermo camera visualization. The experiments were performed in closed circuit wind tunnels with closed and open test sections. The lift curves for both cases without and with vortex generators were acquired for a lift coefficient improvement determination. The improvement was achieved for several cases by means all of the applied methods.
    PracovištěÚstav termomechaniky
    KontaktMarie Kajprová, kajprova@it.cas.cz, Tel.: 266 053 154 ; Jana Lahovská, jaja@it.cas.cz, Tel.: 266 053 823
    Rok sběru2011
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.