Počet záznamů: 1  

Application of Small Punch Tests in Estimation of the Properties of Heat-affected Zones

  1. 1.
    SYSNO ASEP0325403
    Druh ASEPC - Konferenční příspěvek (mezinárodní konf.)
    Zařazení RIVD - Článek ve sborníku
    NázevApplication of Small Punch Tests in Estimation of the Properties of Heat-affected Zones
    Překlad názvuPoužití protlačovací zkoušky pro odhad vlastností tepelně ovlivněných oblastí
    Tvůrce(i) Dobeš, Ferdinand (UFM-A) RID, ORCID
    Milička, Karel (UFM-A)
    Sobotka, J. (CZ)
    Kuboň, Z. (CZ)
    Zdroj.dok.Creep and Fracture in High Temperature Components - Design & Life Assessment Issues. - Lancaster, PA : DEStech Publications, Inc, 2009 / Shibli I.A. ; Holdsworth S.R. - ISBN 978-1-60595-005-1
    Rozsah strans. 1118-1125
    Poč.str.8 s.
    AkceECCC Creep Conference /2./
    Datum konání21.04.2009-23.04.2009
    Místo konáníDubendorf
    ZeměCH - Švýcarsko
    Typ akceWRD
    Jazyk dok.eng - angličtina
    Země vyd.US - Spojené státy americké
    Klíč. slovaSmall punch test ; Cross-weld creep test ; Type IV cracking
    Vědní obor RIVJG - Hutnictví, kovové materiály
    CEPIAA200410801 GA AV ČR - Akademie věd
    CEZAV0Z20410507 - UFM-A (2005-2011)
    AnotaceThe small punch test technique was applied in the analysis of the creep properties of a real weld taken from a piping system used in a power plant after long-term service. The base material of the pipes was 0.5Cr-0.5Mo-0.3V steel. Specimens for small punch tests were taken from strictly localised places: from the base material, from the weld material and from the heat-affected zone. Two types of specimens for conventional creep testing were prepared from the same weld: they were cut either exclusively from the base material or as cross-weld specimens. Results of both testing types, i.e., conventional creep and small punch, are compared and discussed with the aim of demonstrating the possibility of using small punch tests to characterise the damage sensitivity of various regions of the welds.
    PracovištěÚstav fyziky materiálu
    KontaktYvonna Šrámková, sramkova@ipm.cz, Tel.: 532 290 485
    Rok sběru2009
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.