Počet záznamů: 1  

Failure analysis of thermally cycled columnar thermal barrier coatings produced by high-velocity-air fuel and axial-suspension-plasma spraying: A design perspective

  1. 1.
    0489520 - ÚFP 2019 RIV GB eng J - Článek v odborném periodiku
    Ganvir, A. - Vaidhyanathan, V. - Markocsan, N. - Gupta, M. - Pala, Zdeněk - Lukáč, František
    Failure analysis of thermally cycled columnar thermal barrier coatings produced by high-velocity-air fuel and axial-suspension-plasma spraying: A design perspective.
    Ceramics International. Roč. 44, č. 3 (2018), s. 3161-3172. ISSN 0272-8842. E-ISSN 1873-3956
    Institucionální podpora: RVO:61389021
    Klíčová slova: Columnar Thermal Barrier Coatings * Axial Suspension Plasma spraying * Thermal Cyclic Fatigue * High Velocity Air Fuel Spraying
    Obor OECD: Coating and films
    Impakt faktor: 3.450, rok: 2018
    https://www.sciencedirect.com/science/article/pii/S0272884217325403

    Axial-suspension-plasma spraying (ASPS) is a fairly recent thermal spray technology which enables production of ceramic top coats in TBCs, incorporating simultaneously the properties of both the conventional-plasma sprayed (highly insulating porous structures) and electron-beam-physical-vapor-deposited (strain-tolerant columnar structures) top coats. TBCs are required to insulate the hot components in a gas turbine engine against high temperature and harsh operating conditions. Periodic heating and cooling of turbine engines during operation can create severe thermal cyclic fatigue conditions which can degrade the performance of these coatings eventually leading to the failure. An in-depth experimental investigation was performed to understand the failure behavior of columnar TBCs subjected to thermal cyclic fatigue (TCF) test at 1100 degrees C. The study revealed that the TCF performance was influenced to an extent, by the top coat microstructure, but was primarily affected by the severity of thermally grown oxide (TGO) growth at the bond coat-top coat interface. Mixed failure modes comprising crack propagation through the bond coat-TGO interface, through TGO and within the top coat were identified. Based on the analysis of the experimental results and thorough discussion a novel design of microstructure for the high TCF performance columnar TBC is proposed.
    Trvalý link: http://hdl.handle.net/11104/0283925

     
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.