Počet záznamů: 1  

Deformational Response of Rocks to Uniaxial, Biaxial, and Triaxial Loading or Unloading Regimes

  1. 1.
    0475825 - ÚGN 2018 RIV NL eng C - Konferenční příspěvek (zahraniční konf.)
    Janeček, Ivan - Mishra, A. Deepak
    Deformational Response of Rocks to Uniaxial, Biaxial, and Triaxial Loading or Unloading Regimes.
    Procedia Engineering - ISRM European Rock Mechanics Symposium EUROCK 2017. Amsterdam: Elsevier Ltd., 2017 - (Koníček, P.; Souček, K.; Konečný, P.), s. 332-341. 191. ISSN 1877-7058.
    [ISRM European Rock Mechanics Symposium EUROCK 2017. Ostrava (CZ), 20.06.2017-23.06.2017]
    Grant CEP: GA MŠMT(CZ) LO1406; GA MŠMT ED2.1.00/03.0082
    Institucionální podpora: RVO:68145535
    Klíčová slova: triaxial testing * equi-biaxialloading * compressibility * uniaxial loading * isotropic compression * Hooke's law
    Obor OECD: Materials engineering
    http://www.sciencedirect.com/science/article/pii/S1877705817323299

    In material sciences, it is a well-known fact that linear or linearized theory based on Hooke's law does not offer a satisfactory description of solids in special regimes, which include e.g. too high strains under large uniaxial stresses. Therefore, in general, the response to biaxial or triaxial loading cannot be obtained as superposition of uniaxial load responses. Striking paper book example of material demonstrating such behavior is rubber subjected to uniaxial or isotropic compression. Despite this fact, linear mechanical moduli, being secant or differential, determined through standard rock-mechanics tests, mostly from the uniaxial compression, are still widely used for description of deformational behavior of rocks. Without doubt, an appropriate interpretation of these effective quasi-elastic or stiffness moduli can give useful information about mechanical properties of the rocks, especially in comparative sense. However, for more reliable constitutive modeling of any solid materials, paricularly rocks, an experimental investigation of deformational responses to uniaxial, biaxial and triaxial loading or unloading regimes is very useful. This contribution presents the results of an experimental case study on homogeneous sandstone exposed to isotropic triaxial, and equi-biaxial or uniaxial loading regimes. The measured deformational response of this rock is compared with behavior of elastic solid materials. Finally, benefit of the experimental testing for constitutive modeling based on phenomenological description is briefly discussed.
    Trvalý link: http://hdl.handle.net/11104/0272451

     
    Název souboruStaženoVelikostKomentářVerzePřístup
    UGN_0475825.pdf0382.4 KBVydavatelský postprintpovolen
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.