A computational investigation on the reducing lateral vibration of rotors with rolling-element bearings passing through critical speeds by means of tuning the stiffness of the system supports

0368079 - ÚT 2012 RIV NL eng J - Článek v odborném periodiku
Zapoměl, Jaroslav - Ferfecki, Petr
A computational investigation on the reducing lateral vibration of rotors with rolling-element bearings passing through critical speeds by means of tuning the stiffness of the system supports.
Mechanism and Machine Theory. Roč. 46, č. 5 (2011), s. 707-724. ISSN 0094-114X. E-ISSN 1873-3999
Výzkumný záměr: CEZ:AV0Z20760514
Klíčová slova: accelerating rotors * critical speeds * tuning of the stiffness of the rotor supports
Kód oboru RIV: JR - Ostatní strojírenství
Impakt faktor: 1.366, rok: 2011
http://www.sciencedirect.com/science/article/pii/S0094114X10002314

Since there are manufacturing and assembling inaccuracies rotors are always slightly imbalanced. Their rapid angular acceleration leads to an increase in the magnitude of the tangential component of the imbalance forces. The frequency tuning achieved by changing the stiffness of the rotor supports represents one approach to its attenuation. Stiffness decreases shortly before reaching the critical speed, and after crossover, the stiffness increases again. As almost all publications and computer procedures from the field of rotor dynamics deal only with the case when the rotor turns at a constant angular speed, derivation of the equations of motion of the rotor rotating at variable velocities and investigation of the operating conditions and individual parameters of the supports on the vibration of the rotor passing critical speeds represent the fully new contribution of this paper. To solve the equations of motion the Newmark method has been proposed and tested.
Trvalý link: http://hdl.handle.net/11104/0202536