0430261 - ÚGN 2015 RIV CZ eng A - Abstrakt
Vavro, Martin - Souček, Kamil - Staš, Lubomír - Waclawik, Petr - Vavro, Leona - Koníček, Petr - Ptáček, Jiří
Alternative methods for RQD parameter determination.
5th International Colloquium on Geomechanics and Geophysics. GECO 2014. Vol. 5. Ostrava: Ústav geoniky AV ČR, 2014 - (Koníček, P.; Souček, K.; Heroldová, N.). s. 53-54. ISBN 978-80-86407-49-4.
[5th International Colloquium on Geomechanics and Geophysics. 24.06.2014-27.06.2014, Ostravice, Karolínka]
Grant CEP: GA MŠMT ED2.1.00/03.0082
Institucionální podpora: RVO:68145535
Klíčová slova: rock quality designation (RQD * rock fracturing * rock mass classification * geotechnical monitoring
Kód oboru RIV: DH - Báňský průmysl vč. těžby a zpracování uhlí

The Rock Quality Designation index (RQD) developed by Deere et al. [1] represents one of the basic parameters which enter into the calculation of rock mass quality by index rock mass classification systems RMR [2, 3] and Q [4]. The RQD is defined as the percentage of the sum of the lengths of intact core pieces longer than 100mm (4 inches) relative to the chosen length of evaluated drill core and originally, it was also defined for the purpose of rock mass quality classification. However, RQD is a single parameter value, which directionally depends on the borehole orientation towards the bedding or metamorphic foliation and reflects a rate of rock mass failure only stated on the basis of drill core fragmentation by discontinuities.
Trvalý link: http://hdl.handle.net/11104/0235205