Počet záznamů: 1  

Atmospheric pressure barrier torch discharge and its optimization for flexible deposition of TiO.sub.2./sub. thin coatings on various surfaces

  1. 1.
    0333773 - FZÚ 2010 RIV CH eng J - Článek v odborném periodiku
    Kment, Štěpán - Klusoň, Petr - Žabová, Hana - Churpita, Olexandr - Chichina, Mariya - Čada, Martin - Gregora, Ivan - Krýsa, J. - Hubička, Zdeněk
    Atmospheric pressure barrier torch discharge and its optimization for flexible deposition of TiO2 thin coatings on various surfaces.
    [Atmosferický bariérový pochodňový výboj a jeho optimizace pro flexibilní depozice tenkých vrstev TiO2 na různé substráty.]
    Surface and Coatings Technology. Roč. 204, č. 5 (2009), s. 667-675. ISSN 0257-8972
    Grant CEP: GA AV ČR KJB100100703; GA AV ČR KAN301370701; GA AV ČR KAN400720701; GA ČR GA202/09/0800
    Výzkumný záměr: CEZ:AV0Z10100522; CEZ:AV0Z40720504
    Klíčová slova: atmospheric plasma * thin layers * titanium dioxide * PECVD * optical emmision spectroscopy
    Kód oboru RIV: BM - Fyzika pevných látek a magnetismus
    Impakt faktor: 1.793, rok: 2009

    The paper reports on preparation of titanium (IV) oxide films via the improved atmospheric pressure Barrier Torch Discharge (BTD) deposition. The major treated topic comprises the influence of the used support on the physical properties of the layers. A set of three different supports were used including quartz slides (non-conducting, dielectric), silicon discs (semi-conducting) and polished Ni sheets (conducting). Crystallographic structure, surface roughness, surface wettability and the film thickness were assessed and used as a set of physical properties to be discussed and compared for each of the films and mutually. In parallel the qualitative analysis of the emission spectra of the Barrier Torch Discharge during the deposition process was also presented. Photocatalytic functionality of the layers was quantified in a simple test based on the photocatalytic oxidation of Rhodamine B (C28H31ClN2O3) under UV radiation.

    Práce se zabývá přípravou vrstev TiO2 pomocí atmosferického bariérového pochodňového výboje. Tato metoda je založena na plazma - chemických reakcích par výchozího chemického prekurzoru, probíhajících v prostředí aktivního plazmatu. Tenké vrstvy vznikají ve smyslu heterogenních rekombinačních reakcích na povrchu substrátu. Hlavním tématem práce je studium vlivu použitého substrátu. Byly použity tři různé typy substrátu (křemenné sklo, křemík, leštěný nikl). Připravené vrstvy byly důkladně charakterizovány a byly studovány jejich fotokatalytické vlastnosti.
    Trvalý link: http://hdl.handle.net/11104/0178685

     
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.