0577421 - ÚGN 2025 RIV CH eng J - Článek v odborném periodiku
Říha, Zdeněk - Zeleňák, Michal - Nag, Akash - Poloprudský, Jakub - Kruml, Tomáš - Hloch, Sergej
A study of the erosion characteristics of an EN AE-6060 aluminium alloy processed using middle and high power continuous and modulated water jets.
Wear. 536-537, January 2024 (2024), č. článku 205154. ISSN 0043-1648. E-ISSN 1873-2577
Grant CEP: GA ČR(CZ) GA23-05235S
Institucionální podpora: RVO:68145535 ; RVO:68081723
Klíčová slova: modulated water jet * continuous water jet * self-excitation water flow * hydrodynamic nozzle * material erosion
Obor OECD: Mechanical engineering; Mechanical engineering (UFM-A)
Impakt faktor: 5.3, rok: 2023 ; AIS: 0.804, rok: 2023
Způsob publikování: Omezený přístup
Web výsledku:
https://www.sciencedirect.com/science/article/pii/S0043164823005379?via%3DihubDOI: https://doi.org/10.1016/j.wear.2023.205154

This study investigates the erosion performances of a high-speed modulated jet (MWJ) and continuous water jet (CWJ). Two sets of hydrodynamic nozzles (HDNs) and two circular water nozzles (CWNs) were compared for two levels of hydraulic power (26 and 62 kW), representing middle- and high-power energetic water jets. The HDNs and CWNs were selected based on their size equivalence factor. The erosion effects of modulated and continuous jets were compared using the aluminum alloy EN AW-6060. Owing to the anisotropy of the modulated jet, two orientation angles (0° and 90°) were used in the experiment with a traverse speed of v = 1 mm/s at an optimal standoff distance z (mm). The hydraulic power of the generated water jets was monitored online using a flowmeter and pressure sensor. Overall, 36 runs were performed for mutual comparison. Optical and scanning electron microscopy were employed to investigate the grooves created using these techniques. Achieving a sharper interface in a deeper groove is possible under certain conditions, thereby inducing the effect of the liquid saw blade. In addition, this phenomenon reduces the effect of lateral flow action, which causes significant extrusion of the material above the original plane of the surface when using a pulsating water jet.
Trvalý link: https://hdl.handle.net/11104/0346566