Počet záznamů: 1  

Polyamic acid: nanoprecipitation and electrophoretic deposition on porous supports

  1. 1.
    0484073 - ÚFCH JH 2019 RIV US eng J - Článek v odborném periodiku
    Brabec, Libor - Sysel, P. - Plšek, Jan - Kočiřík, Milan - Dickerson, J.H.
    Polyamic acid: nanoprecipitation and electrophoretic deposition on porous supports.
    Journal of Coatings Technology and Research. Roč. 15, č. 3 (2018), s. 489-496. ISSN 1547-0091
    Institucionální podpora: RVO:61388955
    Klíčová slova: Dimethylsulfoxide * EPD * Polyimide
    Kód oboru RIV: CF - Fyzikální chemie a teoretická chemie
    Obor OECD: Physical chemistry
    Impakt faktor: 1.584, rok: 2018

    Polyamic acid (PAA, a precursor of polyimide) was synthesized from 4,4¢-oxydiphthalic anhydride and 4,4¢-oxydianiline. PAA, dissolved in dimethylsulfoxide (DMSO), was precipitated into colloidal particles after its injection into acetone. The resulting particle size distribution was found to depend on aging time of PAA solutions, their concentration, and the manner in which the solutions were mixed with acetone. PAA particles of any size down to 10 nm appeared to be achievable by decreasing the acetone/ DMSO ratio. Particles in DMSO/acetone suspensions were found to have a significant negative zeta potential. Therefore, there was no need to add organic bases
    to form PAA anions, in contrast to all previously published studies on the PAA electrodeposition. EPD was performed onto porous stainless-steel or alumina disks, which are suitable supports (reinforcements) for membranes. The slow evaporation of DMSO residue yielded dried polymer layers, comprised of 50-100 nm PAA globules. The outer surface of layers was usually covered with a very thin, continuous PAA skin. Such supported PAA layers-after a simple imidization step via a heat treatment-could be applied as thermally resistant membranes for gas separation.
    Trvalý link: http://hdl.handle.net/11104/0279243
    Název souboruStaženoVelikostKomentářVerzePřístup
    0484073.pdf12.4 MBVydavatelský postprintvyžádat
Počet záznamů: 1