0481459 - ÚFM 2018 RIV CH eng J - Článek v odborném periodiku
Stratil, Luděk - Šiška, Filip - Hadraba, Hynek - Bártková, Denisa - Fintová, Stanislava - Puchý, V.
Fracture behavior of the ODS steels prepared by internal oxidation.
Fusion Engineering and Design. Roč. 124, NOV (2017), s. 1108-1111. ISSN 0920-3796. E-ISSN 1873-7196
Grant CEP: GA ČR GJ15-21292Y; GA ČR(CZ) GA14-25246S
Institucionální podpora: RVO:68081723
Klíčová slova: ODS * Internal oxidation * Fracture toughness * J-R curve * Fracture analysis
Obor OECD: Materials engineering
Impakt faktor: 1.437, rok: 2017 ; AIS: 0.281, rok: 2017
DOI: https://doi.org/10.1016/j.fusengdes.2017.03.008

The up-to-date developing activities of ODS steels were mainly focused on strength and creep properties. However, other properties like irradiation resistance, corrosion resistance, fracture toughness, fatigue are also crucial for their applications. In this work, fracture behavior of 9%Cr ODS steels with no strengthening phase and with different composition of strengthening phase based on yttrium and aluminum oxides developed at IPM was evaluated. Fracture toughness testing was done in the temperature range from-100 to +550°C. All three variants of the steel demonstrated fully ductile behavior from the temperature -50°C. The results showed that presence of strengthening phase decreases fracture toughness and this effect is proportional to the effect of strengthening. The fractography analysis revealed no clear evidenceof fine strengthening phase on the fracture micromechanism.
Trvalý link: http://hdl.handle.net/11104/0277078