Počet záznamů: 1  

Application of Seismic Parameters for Estimation of Destress Blasting Effectiveness

  1. 1.
    0475722 - ÚGN 2018 RIV NL eng C - Konferenční příspěvek (zahraniční konf.)
    Wojtecki, Ł. - Mendecki, M. - Koníček, Petr - Zuberek, W. M.
    Application of Seismic Parameters for Estimation of Destress Blasting Effectiveness.
    Procedia Engineering - ISRM European Rock Mechanics Symposium EUROCK 2017. Amsterdam: Elsevier Ltd., 2017 - (Koníček, P.; Souček, K.; Konečný, P.), s. 750-760. 191. ISSN 1877-7058.
    [ISRM European Rock Mechanics Symposium EUROCK 2017. Ostrava (CZ), 20.06.2017-23.06.2017]
    Institucionální podpora: RVO:68145535
    Klíčová slova: active rockburst prevention * long-hole destress blasting * seismic effect * seismic source parameters
    Obor OECD: Mining and mineral processing
    http://www.sciencedirect.com/science/article/pii/S1877705817323810

    Coal seams in the Upper Silesian Coal Basin are currently extracted under more and more disadvantageous geological and mining conditions. Mining depth, geological dislocations and mining remnants are factors which affect the rockburst hazard during underground mining to the greatest extent. This hazard can be minimized by employment of active rockburst prevention, where long-hole destress blasts in roof rocks (torpedo blasts) have an important role. The main goal of these blastings is to either destress local stress concentrations in rock mass and to fracture the thick layers of strong roof rocks to prevent or minimize the impact of high energy tremors on the excavations. Sometimes, these blastings are performed to make the roof rocks caving behind the longwall face easier. The efficiency of blasting is typically evaluated from the seismic effect, which is calculated based on seismic monitoring data (seismic energy) and the weight of the charged explosive. This method, as used previously in the Czech Republic, was adopted in a selected Polish hard coal mine in the Upper Silesian Coal Basin. This method enables rapid and easy estimation of destress blasting effectiveness, adjusted to conditions occurring in the designed colliery. Destress blasts effectiveness may be evaluated via the seismic source parameters analysis as well, as was carried out in the selected colliery in the Polish part of the Upper Silesian Coal Basin. These parameters provide information, for example, on its size, state of stress and occurrence of slip mechanism in the source of provoked tremors. Long-hole destress blasting effectiveness in selected colliery has been evaluated using the seismic effect method and seismic source parameters analysis. The results were compared with each other and conditions were observed in situ.
    Trvalý link: http://hdl.handle.net/11104/0272360

     
    Název souboruStaženoVelikostKomentářVerzePřístup
    UGN_0475722.pdf0603.9 KBVydavatelský postprintpovolen
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.