0469851 - ÚMCH 2017 RIV CH eng J - Článek v odborném periodiku
Depa, Katarzyna - Strachota, Adam - Šlouf, Miroslav - Brus, Jiří - Cimrová, Věra
Synthesis of conductive doubly filled poly(N-isopropylacrylamide)-polyaniline-SiO2 hydrogels.
Sensors and Actuators B - Chemical. Roč. 244, June (2017), s. 616-634. ISSN 0925-4005. E-ISSN 0925-4005
Grant CEP: GA MŠMT(CZ) LD14010; GA ČR(CZ) GA13-26542S
Grant ostatní: European Commission(XE) COST Action MP1202 HINT
Institucionální podpora: RVO:61389013
Klíčová slova: PNIPAm hydrogel * polyaniline * silica
Obor OECD: Polymer science
Impakt faktor: 5.667, rok: 2017 ; AIS: 0.787, rok: 2017
DOI: https://doi.org/10.1016/j.snb.2016.12.121

Temperature-responsive and electrically conductive doubly filled highly porous poly(N-isopropylacrylamide)/SiO2/polyaniline hydrogels were successfully prepared. They contained 2.5–44 wt.% PANI in dry gel and 6 wt.% SiO2 in the PANI-free part of the dry gel. These materials are of interest as potential actuators (generating movement or pressure change), because of their ultra-fast volume changes, which can be triggered by ohmic- or by induction heating (remote triggering in the latter case), as well as in the function of electrical switches controlled by heating/cooling (shrinking and expanding conductive element). The prepared doubly filled porous gels display reversible and symmetrical response to temperature jumps as fast as 6 s for 75% of the swelling change, and conductivities as high as 74 000 mu S/cm. After testing several synthesis approaches, an efficient two-step route was developed, consisting in the impregnation of porous PNIPAm/SiO2 precursor gels with PANI precursors, which led to a highly selective PANI incorporation into the pore walls (as sub-micrometre-sized irregular and branched filaments). The incorporation of the ‘first filler’, nano-SiO2, was crucial in the developed synthesis, which required an ultra-fast T-responsivity of the PANI-free precursor gel. In order to achieve optimal conductivities, the PANI filler was reduced to the emeraldine form using SnCl2. Conductivity measurements indicated, that PANI percolation is approached near 20 wt.%, and achieved between 20 and 44 wt.%. At such loadings, PANI also acts as a distinct mechanical reinforcement in the gels.
Trvalý link: http://hdl.handle.net/11104/0269273