Preparation of conducting polysiloxane/polyaniline composites

0445036 - ÚMCH 2016 RIV US eng J - Článek v odborném periodiku
Depa, Katarzyna - Strachota, Adam - Stejskal, Jaroslav - Bober, Patrycja - Cimrová, Věra - Prokeš, J. - Trchová, Miroslava - Šlouf, Miroslav - Hodan, Jiří
Preparation of conducting polysiloxane/polyaniline composites.
Journal of Applied Polymer Science. Roč. 132, č. 35 (2015), 42429_1-42429_11. ISSN 0021-8995. E-ISSN 1097-4628
Grant CEP: GA ČR GAP107/12/2445; GA ČR(CZ) GA13-26542S
Institucionální podpora: RVO:61389013
Klíčová slova: coatings * composites * conducting polymers
Kód oboru RIV: JI - Kompozitní materiály
Impakt faktor: 1.866, rok: 2015

Polysiloxane/polyaniline microcomposites were prepared, in which polyaniline particles act as filler, thus combining the mechanical properties of polysiloxane matrix with conductivity of polyaniline. Two syntheses were evaluated: (1) homogeneous dispersion of a polyaniline colloid in the reaction mixture from which the polysiloxane matrix subsequently formed, and (2) the blending of previously prepared dry polyaniline particles with a liquid oligomeric siloxane resin followed by cure (“heterogeneous method”). Both methods lead to composites with evenly distributed filler. Electrical conductivity was achieved above 40 wt % of polyaniline, which is better obtained by the “heterogeneous” method. During the composite cure, the polyaniline particles, which are softer than the matrix, act as a catalyst and cause more efficient matrix crosslinking, thus leading to somewhat raised moduli. Although particulate fillers usually deteriorate the impact toughness, in the case of the prepared composites, the impact toughness was preserved due to the softer consistence of the filler, which hinders crack propagation.
Trvalý link: http://hdl.handle.net/11104/0247932