0438716 - FZÚ 2015 RIV DE eng J - Článek v odborném periodiku
Domonkos, Mária - Ižák, Tibor - Štolcová, L. - Proška, J. - Kromka, Alexander
Fabrication of periodically ordered diamond nanostructures by microsphere lithography.
Physica Status Solidi B. Roč. 251, č. 12 (2014), s. 2587-2592. ISSN 0370-1972. E-ISSN 1521-3951
Grant CEP: GA ČR(CZ) GBP108/12/G108
Institucionální podpora: RVO:68378271
Klíčová slova: CVD growth * diamond * microsphere lithography * selective area deposition
Kód oboru RIV: BM - Fyzika pevných látek a magnetismus
Impakt faktor: 1.469, rok: 2014 ; AIS: 0.483, rok: 2014
DOI: https://doi.org/10.1002/pssb.201451172

In this paper, we demonstrate the growth of diamond structures well ordered in periodic arrays. The technological process starts with ultrasonic seeding of Si substrates by ultra-dispersed detonation diamond nanoparticles. Then, a monolayer of polystyrene microspheres (PS) is deposited on seeded Si substrates by Langmuir–Blodgett method. The primary diameter of PS varies from 253 to 940 nm. The self-assembled PS are employed as a mechanical mask for reactive ion etching of the seeding layer via reducing the PS diameter down. The seeding structures remained under reduced PS were used for growing periodically ordered diamond arrays by microwave plasma-assisted chemical vapor deposition from a hydrogen rich gas mixture. Cross-section SEM images reveal that the diameter and size of the formed diamond structures increase both in vertical and lateral direction.
Trvalý link: http://hdl.handle.net/11104/0242101