0437339 - FZÚ 2015 RIV CH eng J - Článek v odborném periodiku
Musil, Jindřich - Hromadka, M. - Novák, P.
Effect of nitrogen on tribological properties of amorphous carbon films alloyed with titanium.
Surface and Coatings Technology. Roč. 205, Jul (2011), S84-S88. ISSN 0257-8972. E-ISSN 1879-3347
Výzkumný záměr: CEZ:AV0Z10100522
Klíčová slova: Ti(N,C)/a-C films * mechanical properties * friction * wear * reactive magnetron sputtering
Kód oboru RIV: BH - Optika, masery a lasery
Impakt faktor: 1.867, rok: 2011 ; AIS: 0.611, rok: 2011
DOI: https://doi.org/10.1016/j.surfcoat.2010.12.048

The article reports on the dependency of friction and wear of a-(Ti,C,N) films on the nitrogen content. The amount of nitrogen N in the film was controlled by partial pressure of nitrogen p(N2) in the Ar + N(2) sputtering gas mixture. It is shown that the incorporation of N in the film results in the increase of (i) the coefficient of friction mu (increases from 0.12 to 0.37), (ii) the coefficient of wear k (increases from 0.16 x 10(-6) to 0.93 x 10(-6) mm(3)/N m) and the decrease of (i) the film hardness H, (ii) effective Young's modulus E*, (iii) the elastic recovery W(e) of film and (iv) the ratio H/E*. The changes of mu and k of the a-(Ti,C,N) film correlate well with changes of the film mechanical properties (H and E*) and its mechanical behavior (W(e), H/E* and the ratio H(3)/E*(2)) characterizing the film resistance to plastic deformation
Trvalý link: http://hdl.handle.net/11104/0240897