Počet záznamů: 1  

Assessment of the unstressed lattice parameters for residual stresses determination by neutron diffraction in engineering materials

  1. 1.
    0435710 - ÚJF 2015 RIV CH eng C - Konferenční příspěvek (zahraniční konf.)
    Rogante, M. - Mikula, Pavol - Vrána, Miroslav
    Assessment of the unstressed lattice parameters for residual stresses determination by neutron diffraction in engineering materials.
    Key Engineering Materials. Vol. 592-593. Stafa-Zurich: Transt Tech Publications Ltd, 2014 - (Šandera, P.), s. 465-468. ISSN 1013-9826.
    [MSMF 7 - International Conference on Materials Structure and Micromechanics of Fracture /7./. Brno (CZ), 01.07.2013-03.07.2013]
    Grant CEP: GA MŠMT LM2011019
    GRANT EU: European Commission(XE) 283883 - NMI3-II
    Institucionální podpora: RVO:61389005
    Klíčová slova: residual stresses * interphlanar distance * neutron diffraction * steels * aloys * industrial applications
    Kód oboru RIV: BM - Fyzika pevných látek a magnetismus

    Thermal neutrons are very useful probe in a nondestructive determination of internal stress, due to their high penetration into most materials. In comparison with conventional Xray techniques, real bulk information on both macro- and micro-strains in materials can be obtained by neutron diffraction techniques. Knowledge of the spatial and directional distribution of internal residual stresses is increasingly considered fundamental to determine their influence on properties of engineering materials and a consequent material behaviour. As the assesment of stresses is always related to the stress free material state, an accurate evaluation of the unstressed lattice parameters, in order to determine RS by ND is one of the key tasks. It helps to avoid inacceptable errors in the course of the real material strain and stress evaluation. The availability of carefully measured zero-strain standards is also essential to confirm the absence of systematic instrumental effects determining the diffraction profile at a chosen scattering angle. In this paper, the state of the art of the main analytical and experimental procedures currently established or adoptable to determine these critical parameters, particularly regarding industrial applications, is presented.
    Trvalý link: http://hdl.handle.net/11104/0239533

     
     
Počet záznamů: 1  

  Tyto stránky využívají soubory cookies, které usnadňují jejich prohlížení. Další informace o tom jak používáme cookies.